THE MOST TRUSTED PLACETO BUY TRAVERTINE®SINCE 2007
Skip to guide content

TRAVERTINE MART · THE BUYER’S GUIDE

Salt Water Protection for Travertine

2 minute read Material selection and project planning

Plan stone selection, drainage and care for salt-water exposure. Sealing travertine is optional. If you choose to seal, use a compatible product and follow its instructions.

Assess splash and retained moisture

Look at the pool edge, deck slope and places where water remains. Include irrigation and shaded areas. Repeated wetting can leave salt deposits after water evaporates.

Ask your pool specialist and installer to coordinate the water and paving details. Correct retained moisture before choosing a surface treatment.

If you choose to seal travertine

Select a sealer approved for the stone and pool exposure. Follow its application timing instructions, including any stated treatment before installation. Confirm compatibility with the setting system.

Do not assume every sealer protects against salt-related damage. Follow the product instructions and keep the maintenance record.

Use the material-specific requirements

Travertine, marble, limestone and shellstone differ by product. Our limestone and shellstone pages specify sealing both sides before installation. Confirm the method with the installer and sealer supplier.

Do not apply travertine test data or warranty coverage to other materials. The current warranty lists its covered products and exclusions.

Plan gentle maintenance

  • Keep drainage routes clear.
  • Use cleaners approved for the stone and treatment.
  • Do not use vinegar or a general acidic cleaner.
  • Investigate repeated deposits before aggressive cleaning.
  • Review persistent damage with a stone-care professional.

Coordinate the installation

Read salt-water pool installation planning for the deck and coping detail. Use the installation guide with your installer.

Confirm the stone, finish, setting materials and care plan before you order.

Questions and answers

Does sealing eliminate salt-water risk?

No. Stone properties, exposure, drainage and maintenance also affect the result.

Can I use the same treatment on all four stone types?

Only if the supplier approves the product for each stone and the intended exposure. Test representative material.

FROM RESEARCH TO YOUR PROJECT

See the stone. Confirm the details.

Compare samples, choose your material and ask our team to review the delivered scope.

Find your stoneRequest an estimate

No credit card needed for an initial, non-binding estimate request.

Subscribe to our newsletter and
receive exclusive discounts

Thank you for subscribing!
# # # # #